Commercial · Mesa, AZ
Your commercial driveway entrance is where heavy vehicles hit the pavement hardest, so the apron and tie-in have to be built like a loading area, not a residential drive. Serving Mesa since 2017, Apex Asphalt Mesa installs and repairs entrance aprons, driveway approaches, and truck-rated transitions that reduce scraping, potholes, and water intrusion.
Prep and base make or break a commercial driveway entrance. We start by marking limits, checking existing asphalt thickness, and removing failed material down to stable subgrade. Soft spots get undercut and rebuilt, then we install and compact aggregate base (often ABC) in lifts using a vibratory roller or plate compactor, with proof-rolling when needed to confirm stability before any hot mix goes down.
Mesa heat, sun exposure, and monsoon runoff punish entrance edges, so we build for drainage and shear strength. We set proper grades and cross-slope to move water away from the throat of the drive, then place hot mix asphalt (typically a dense-graded mix) with a paver or by hand where tight, and compact to lock in density and prevent raveling. For repairs, we saw-cut clean rectangles, tack-coat the vertical faces, and install a full-depth patch with tight joints that resist unraveling under turning tires.
Mesa customers choose us because we focus on commercial access points that have to stay open and safe. Expect clear traffic-control planning, staged work to keep entrances usable, and a crew that understands turning radii, heavy wheel loads, and curb-and-gutter tie-ins. As a licensed and insured asphalt contractor, we provide a written scope that specifies removal depth, base thickness, mix type, and compaction approach so you can compare apples to apples.
Before we wrap, we do a walkthrough to confirm smooth transitions, clean edges, and drainage performance at the apron and gutter line. You get a free written estimate, a straightforward schedule, and jobsite cleanup that includes sweeping loose rock and asphalt crumbs from the drive and adjacent parking. If striping, sealcoating, or speed bump adjustments are needed after the entrance work, we can coordinate those add-ons so your site reopens with a finished, professional look.
Yes. We provide a free written estimate after a site visit so we can verify square footage, access, and what prep is required.
Light foot traffic is often possible the same day, but vehicles should typically stay off for at least 24-48 hours depending on temperature, mix, and thickness. We’ll give you a specific reopen time at the jobsite.
Yes. We correct grades with milling, regrading, and asphalt leveling where appropriate, then pave to establish consistent slope and proper tie-ins at concrete, gutters, and entries.
Yes. We handle parking lot paving, overlays, patching, crack sealing, and sealcoating, and we can phase work to keep access open.
Crack sealing typically includes cleaning and sealing cracks with rubberized crack filler to reduce water intrusion. Sealcoating applies a protective coat over the surface after prep work, but it does not correct failed base or deep structural cracks.
A commercial driveway entrance takes the highest stress on your property, where delivery trucks, service vans, and customer traffic climb the apron, turn under load, and brake at the sidewalk and curb line. When the entrance settles, cracks, or develops potholes, the damage spreads fast into the drive lane and parking lot. Apex Asphalt Mesa builds and repairs commercial driveway entrance aprons with the right base, proper grades, and tight joints so the transition stays smooth and durable in Mesa conditions.
Commercial driveway entrance work is not just a surface patch. We look at the whole section: subgrade stability, base thickness, and how water moves across the approach. Typical failures include alligator cracking from weak support, depressions from pumping fines, and unraveling at the edge where turning tires scrub the mat. Our process emphasizes excavation to sound material, rebuilding the base, and placing a dense-graded hot mix asphalt with solid compaction so the apron can take repeated point loads.
For repairs, we match the fix to the cause. Isolated potholes often need a full-depth patch rather than a skin patch. Settled areas may require undercutting and new base rock. When the entrance meets existing pavement, we create clean transitions, apply asphalt tack coat for bond, and seal joints where appropriate to slow water intrusion. We can also coordinate concrete work at curb returns or damaged gutter sections when the entrance tie-in requires it.
If you need a new commercial driveway entrance or apron rebuild, we will walk the site, confirm access needs, and provide a written plan that fits your operations. The goal is a smooth, safe approach that protects vehicles, improves curb appeal, and holds up under daily commercial traffic. Contact Apex Asphalt Mesa for a free written estimate and scheduling options.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Mesa. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
